902-835-3727
admin@toalltech.com

Our Services

29 Dec 2023

Fume Hood / Biological Safety Cabinets

According to the Canadian Standards Association (CSA Standard  Z316.5) fume hoods should be performance tested at least once per year. Some of these tests include:

Air Flow Measurement

  • Face velocity
  • Duct traverse
  • Smoke patterns

Physical Characteristics

  • Damper/baffle operations
  • Sash operation
  • Drain operation
  • Stability

Commissioning

  • Electrical safety
  • Lighting
  • Noise
  • Vibration
  • Chemical Evaluation

ALL-TECH can take care of your fume hood annual field testing to keep your equipment properly operating and protecting your staff. Our testing protocol meets and exceeds the CSA standard recommended field tests. All testing is performed with state of the art, calibrated, testing equipment, and after testing certification labels will be applied to the laboratory fume hoods with the corresponding face velocities listed on the labels. You will also be supplied with a detailed technical report.

Biological Safety Cabinets
ALL-TECH can also provide on- site field testing of biological safety cabinets (BSC), clean benches, and laminar flow hoods. BSC are a complex engineering control device used to provide three types of protection during work with microorganisms, viruses, and bacteria. The three types are personnel protection (protecting the operator), product protection (protecting the item worked on from cross contamination), and environmental protection (keeping everything properly filtered and inside the cabinet). Clean benches are a similar type of equipment as a BSC, but it provides product protection only. Manufacturers recommend that clean benches are annually field tested as well.

The worldwide testing standard authority for biological safety cabinets is The National Sanitation Foundation (www.nsf.org). This organization as well as BSC manufacturers recommends that BSC be performance tested and adjusted at least once per year by a qualified field certifier.

Let ALL-TECH take care of your biological safety cabinet annual field testing to keep your equipment properly operating and protecting your staff. All testing is performed with state of the art, calibrated, testing equipment, and after testing certification labels will be applied to the cabinets, as well as submittal of a detailed testing report.

1 Response

  1. Ismaelboish

    Great post however I was wanting to know if you could write a litte more on this topic? I’d be very grateful if you could elaborate a little bit further. Thank you!
    Recharge mobile

en_USEnglish